Is a UV camera dangerous for people
- Infrared rays are not visible. They often occur as thermal radiation together with visible light.
- Depending on the wavelength, infrared radiation can penetrate human tissue and cause damage there.
- Heat rays from 500 ° Celsius can damage the eyes.
- Protect yourself at your workplace with shields and suitable personal protective equipment against the dangers of thermal radiation.
What is infrared radiation?
Infrared radiation (IR radiation) is also often referred to as thermal radiation, as this type of radiation is perceived as heat. Strictly speaking, depending on the temperature, thermal radiation ranges from infrared to visible light (VIS) to ultraviolet (UV). The IR radiation can no longer be perceived by the human eye and extends in the electromagnetic spectrum from 780 nm to 1 mm (1,000,000 nm).
IR radiation is divided into the following three areas
- IR-A (780 nm -1400 nm)
- IR-B (1400 nm - 3000 nm) and
- IR-C (3000 nm - 1 mm)
Heat workplaces are not dealt with on this page.
How does infrared radiation work?
Infrared radiation can penetrate human tissue and cause damage. The longer the wavelength, the smaller the depth of penetration into the tissue. Infrared radiation is divided into three categories:
- IR-A radiation has the greatest penetration depth and can reach the retina and fatty tissue.
- IR-B radiation can no longer reach the retina and only penetrates the blood vessels up to the beginning of the fatty tissue.
- IR-C radiation only reaches the surface of the skin and the cornea.
Thermal damage to the skin
The thermal damage is caused by the increase in temperature of the tissue. Irradiation of the skin by a very intense IR source can lead to burns. A burn is very unlikely, as pain from the heat is felt before a burn, so that one can move away from the source in good time.
Thermal damage to the lens and retina
If the lens of the eye is regularly heated by IR radiation, this can lead to a cataract.
In order for the retina to suffer irreversible damage, a critical temperature of the heated tissue must be exceeded.
Is thermal radiation dangerous?
The risk depends on the temperature:
200 ° C
No visible light
Ovens, IR surface heating element
500 ° C
incipient red heat
incipient danger to lens and cornea
1500 ° C
Blinding white heat
Beginning danger to the retina, danger to lens and cornea
5500 ° C
Danger to the retina, danger from UV radiation to the skin and lens and cornea
Where is one exposed to thermal radiation?
Different workplaces with heat radiation sources:
Source / jobs
Metal smelting, foundries
The most likely to exceed the limit value for the eyes, the hotter the melt, the more dangerous (iron melt: 1450 ° C, aluminum melt: 750 ° C)
Use of shields, minimize exposure time, use of personal protective equipment (PPE) (IR protective goggles, protective clothing)
Limit value for skin and eyes may be exceeded (1600 ° C)
Use of shields, use of visors and appropriate protective clothing
Processing of glass, glassmaker
Limit value for eyes possibly exceeded, v. a. when standing in front of the warm-up drum, glass furnace (the level of exposure depends on the temperature of the radiation source), when processing the glass with gas flames, UV radiation also occurs
Use of shields, wearing of PPE (IR protective glasses without color distortion)
IR radiator for gluing or drying (with a proportion of visible light)
Limit value for eyes may be exceeded (depending on distance and exposure duration)
Use of shielding, wearing PPE (IR protective goggles)
The limit value for eyes is exceeded if you stare into the fire at close range for a long time
IR safety glasses
IR radiant heater
In the catering sector, powerful IR emitters (2kW) are very often used for heating purposes. With an appropriate proximity to the radiator (20 cm), the limit value for the eyes is already set after a short time (< 10="" s)="" überschritten.="" weil="" ein="" grosser="" teil="" des="" sichtbaren="" lichts="" weggefiltert="" wird,="" blenden="" diese="" nicht="" besonders="" stark.="" 10="" s)="" überschritten.="" weil="" ein="" grosser="" teil="" des="" sichtbaren="" lichts="" weggefiltert="" wird,="" blenden="" diese="" nicht="" besonders="">
Corresponding distance to the heater, no direct staring into it
Infrared radiation without a heat source
If IR radiation is generated without a heat source, but with the help of IR light-emitting diodes or lasers, it is invisible. Even if you don't feel any heat on your skin due to the IR source, the IR radiation can be dangerous to the eye. If high-performance IR light-emitting diodes are used (e.g. as lighting for surveillance cameras), a safety distance must be maintained. You cannot tell from an IR light-emitting diode whether it is switched on. This is why the source must be disconnected from the power supply during maintenance work, for example. For IR lasers, the regulations for the corresponding laser class apply (see below).
- How long has it been since Tasmanian tigers lived?
- The view of Orthodox Judaism on homosexuality is changing
- Why should you sabotage your ex
- Political apathy is a crime against humanity
- What is added value
- What does chemotherapy cost
- How can I improve my handwriting 4
- Reuters TV is a trusted news source
- What are some holidays celebrated in Lebanon
- Why did you move to Germany
- Have people become too confident
- Is IIT Kharagpur better than IIT Kanpur
- Are people naturally judgmental
- Kulbhushan Jadhav is dead
- Which language has the best alphabet
- What is powlichu
- What is seed dormancy
- What is international journalism
- Which HIM is best
- The NFL doesn't have American players
- How is Lithuania for architecture
- What are the principles of masculinity
- Wishes Hitler that he was a Muslim
- What are the cheapest contact lenses